Keithley software 2600 series 2601b | 2602b | 2604b | 2606b ns SourceMeter source table software

* The main function ： Automatic parameter configuration 、 Data acquisition and data storage , The software has its own database storage .

* Programmed object ： Source table .

* Programmable interface ：NS-SourceMeter Source meter program control software provides USB、RS232、RS485、TCP/LAN/ Ethernet 、GPIB、TTL And the connection mode of Bluetooth .

* Instrument compatibility ： The system is compatible with Tektronix / Jishili （Tektronix/Keithley）2400 Full series source table 、 Auspicious source table 2600 A full range .

1、 Software overview

◆NS-SourceMeter Source meter program control software is used to realize Automatic test of jishili source table , User pass PC The end realizes the operation of the source table software , Control source table for configuration or measurement , At the same time, the measured data and graphics can be saved .

2、 Software features

◆ Provided by source table software USB、RS232、RS485、TCP/LAN/ Ethernet 、GPIB、TTL And Bluetooth Mode of connection ;

◆ The system can detect the instrument connected to the computer and display the model and serial number ;

◆ The system can display the data measured by the source table in real time , At the same time Graph drawing ;

◆ The system can query the running test history , At the same time, you can return to any running test to view data and graphics ;

◆ A full range of source table software can realize configuration information 、 Export of test data and graphics , Configuration information and test data can be selected CSV Format or Excel Format export .

3、 Hardware based

4、 Compatible partial instrument models

◆ Source table software compatibility Jishili Keithley2400 A full range 、 Jishili Keithley2600A/B A full range Digital source table .（ Some popular models are as follows ）

◆Keithley2400 series ：2400、2401、2410、2420、2425、2430、2440、2450、2460、2461、2470 etc. ;

 ◆Keithley2600 series ：2601B、2602B、2604B、2606B、2611B、2612B、2614B、2634B、2635B、2636B、2651A、2657A etc. ;

6、 Software function introduction

6.1、 Instrument connection

The instrument connection interface can be used to connect the jishili source meter , The software will automatically detect the model of the instrument and automatically connect , You can also choose to connect manually .

6.2、 Parameter configuration

In the middle of the run test interface is the configuration 、 Test data 、 Trend chart . In the configuration interface, you can configure the relevant parameters of the source table , After configuration, click start test to measure and plot the corresponding parameters .

6.3、 Run the test

6.3.1、 Test data

After starting the test, click the test data at the top of the run test interface to enter the data display interface , As shown in the figure . In the data display interface, you can view the measurement data of the current test , At the same time, the maximum value of the current column data is displayed below 、 minimum value 、 Mean and standard deviation , Convenient for data analysis .

6.3.2、 Trend chart

Click the trend chart at the top of the run test interface to enter the trend chart display interface , As shown in the figure . In the trend chart display interface, you can see the graph drawn according to the current measurement data , You can manually select different coordinate axes , You can change the graphic color , You can click a coordinate point to view the specific value , You can zoom in according to the prompt 、 narrow 、 Pan the graph .

6.4、 Export report file and trend chart

In the export interface, you can export files and trend charts , File export can choose to CSV Format or Excel Format export file , At the same time, you can check automatically export new runs , Automatically export files and trend charts after each test run .