Mikrotik ROS soft route setting Internet access mode (I)

You want to configure ros Soft route Internet , You can perform the following operations ：

1、 land ROS Router
  1.1、 Use Winbox Log on to the router
2、 Configure the network port name
  2.1、 Modify the network interface name ,Lan
  2.2、 Modify the network interface name ,WAN
3、 Set up ROS Soft route Intranet IP Address
  3.1、 add to Lan mouth IP Address
4、 Configure the way to connect to the Internet
  4.1、PPPOE dial
    4.1.1、 add to PPPOE Dial up client
    4.1.2、 add to PPPOE Account and password
    4.1.3、 Add default routing information
  4.2、DHCP Automatic access to
    4.2.1、 add to DHCP Client client
    4.2.2、 Add default routing information
  4.3、 static state IP Address
    4.3.1、 Add static IP Address
    4.3.2、 Add default routing information
5、 To configure DNS The server
  5.1、 newly build DNS The server
6、 To configure NAT address translation
  6.1、 Enter the firewall NAT
  6.2、 add to NAT The rules
7、 Add intranet DHCP The server
  7.1、 add to DHCP Address pool
  7.2、 add to DHCP The server
  7.2、 To configure DHCP
8、 Detect the Internet
  8.1、 Use the built-in terminal to detect
  8.2、 Use a computer to detect （ static state IP Address ）

1、 land ROS Router ：

1.1、 Use Winbox Log on to the router

      1、 Download good Winbox Double click the login to open ,
      2、 Click on Neighbors Scan the network ros Soft route ,
      3、 Find your own soft route , You can choose to use MAC Address or IP Address login , The router here has not been configured IP Address is used MAC Address login ,
      4、 Enter the default account ：admin, The default password is blank and you don't need to enter ,
      5、 Click on connect Connect .

Network prompt

2、 Configure the network port name ：

2.1、 Modify the network interface name ,Lan

      1、 When entering Winbox Click on the left after the interface Interfaces Access interface ,
      2、 Select an interface with traffic data in the open interface window , This is basically the port connected to our computer , Double click here to open ,
      3、 On the ether1 Modify in the window of name by Lan, That is, the interface used to connect the intranet ,
      4、 Click on OK.

2.2、 Modify the network interface name ,WAN

      1、 Then select one of the network cards and double-click to open ,
      2、 Here will open ether6 It is amended as follows WAN mouth , Interface used to connect optical cat or Internet ,
      3、 Click on OK.

3、 Set up ROS Soft route Intranet IP Address ：

3.1、 add to Lan mouth IP Address

      1、 And then Winbox Click on the left side of the interface IP,
      2、 Select... In the pop-up list addresses, open IP Address list ,
      3、 Click on the top left + We'll build a new IP Address ,
      4、 Write... In the window IP Address ：192.168.101.1/24, also Interfaces Choose Lan, That is to say, will Lan Oral IP The address is configured to 192.168.101.1,
      5、 Click on OK.