Parker hydraulic oil pump pv140r1k1t1nmm1

parker Hydraulic oil pump PV140R1K1T1NMM1 Problems during maintenance ：

1、 The oil level of the hydraulic oil tank is too low , Can't meet the requirements , This requires adding hydraulic oil to prevent the oil level from being too low .

2、 stay parker When there is internal leakage in the hydraulic oil pump and the seal has aged , The most direct solution is to replace the new sealing ring .

3、 If the hydraulic oil is found to be too dirty , Immediately parker Cleaning of system in hydraulic oil pump and replacement of hydraulic oil ;

4、 if parker The filter in the hydraulic oil pump cannot be filtered due to blockage , Then you can use cleaning liquid to clean the filter , Remove foreign matters .

5、 The main oil seal bone fixed on the shaft of the pump fell off , The main body of the pump is not sealed . The simple method is to replace the oil seal on the pump shaft according to the use situation .

6、 If the oil level is insufficient , The oil suction position is too high , You need to increase the oil level to a sufficient height , Then lower the oil suction position in use .

The above is only true parker Hydraulic oil pump PV140R1K1T1NMM1 Simple maintenance common sense of accessories in use is briefly explained , Only by accumulating experience in practice , In order to better protect and maintain parker Hydraulic oil pump , So as to extend parker Service life of hydraulic oil pump , Replace with a new one parker Hydraulic oil pump accessories , Reduce a lot of unnecessary work .