Huawei wireless device roaming configures non fast roaming between APs of the same service VLAN

1. To configure LSW and AC, send AP And AC Can transmit between CAPWAP message

[LSW1]vlan batch 100

[LSW1-GigabitEthernet0/0/1]port link-type trunk  

[LSW1-GigabitEthernet0/0/1]port trunk allow-pass vlan 100

[LSW1-GigabitEthernet0/0/1]port trunk pvid vlan 100

[LSW1-GigabitEthernet0/0/1]port-isolate enable  

[LSW1-GigabitEthernet0/0/2]port link-type trunk          

[LSW1-GigabitEthernet0/0/2]port trunk allow-pass vlan 100

[LSW1-GigabitEthernet0/0/2]port trunk pvid vlan 100      

[LSW1-GigabitEthernet0/0/2]port-isolate enable            

[LSW1-GigabitEthernet0/0/2]int g0/0/3                    

[LSW1-GigabitEthernet0/0/3]port link-type trunk          

[LSW1-GigabitEthernet0/0/3]port trunk allow-pass vlan 100

[AC1]vlan batch 100 101

[AC1-GigabitEthernet0/0/1]port link-type trunk  

[AC1-GigabitEthernet0/0/1]port trunk allow-pass vlan 100

2. To configure AC Interworking with the upper network equipment

[AC1-GigabitEthernet0/0/2]port link-type trunk          

[AC1-GigabitEthernet0/0/2]port trunk allow-pass vlan 101

3. To configure AC As DHCP The server , by STA and AP Distribute IP Address

[AC1]dhcp enable  

[AC1-Vlanif100]ip add 10.1.100.1 24

[AC1-Vlanif100]dhcp select interface  

[AC1-Vlanif101]ip add 10.1.101.1 24  

[AC1-Vlanif101]dhcp select interface

4. To configure AP go online

[AC1]wlan

[AC1-wlan-view]ap-group name ap-group1  // establish AP Group

[AC1-wlan-view]regulatory-domain-profile name domain1  // Create domain management template , Configure... Under the domain management template AC Country code and in AP Reference domain management template under group

[AC1-wlan-regulate-domain-domain1]country-code cn

[AC1-wlan-view]ap-group name ap-group1                

[AC1-wlan-ap-group-ap-group1]regulatory-domain-profile domain1

[AC1]capwap source interface Vlanif 100  // To configure AC Source interface of

[AC1]wlan

[AC1-wlan-view]ap auth-mode mac-auth  // stay AC Import online and offline AP, And will AP Join in AP Group

[AC1-wlan-view]ap-id 0 ap-mac 00e0-fc38-6cb0

[AC1-wlan-ap-0]ap-name ap1

[AC1-wlan-ap-0]ap-group ap-group1

[AC1-wlan-view]ap-id 1 ap-mac 00e0-fcbb-30c0

[AC1-wlan-ap-1]ap-name ap2

[AC1-wlan-ap-1]ap-group ap-group1

5. To configure WLAN Business parameters

[AC1-wlan-view]security-profile name wlan-security  // Create a security template , And configure the security policy

[AC1-wlan-sec-prof-wlan-security]security wpa2 psk pass-phrase [email protected] aes

[AC1-wlan-view]ssid-profile name wlan-ssid  // establish SSID Templates , And configuration SSID name

[AC1-wlan-ssid-prof-wlan-ssid]ssid wlan-net

[AC1-wlan-view]vap-profile name wlan-vap  // establish VAP Templates , Configure business data forwarding mode 、 Business VLAN, And reference security templates and SSID Templates

[AC1-wlan-vap-prof-wlan-vap]forward-mode tunnel  

[AC1-wlan-vap-prof-wlan-vap]service-vlan vlan-id 101

[AC1-wlan-vap-prof-wlan-vap]security-profile wlan-security

[AC1-wlan-vap-prof-wlan-vap]ssid-profile wlan-ssid

[AC1-wlan-view]ap-group name ap-group1  // To configure AP Group reference VAP Templates ,AP RF on 0 And RF 1 All use VAP Template configuration

[AC1-wlan-ap-group-ap-group1]vap-profile wlan-vap wlan 1 radio all

6. To configure AP RF channel and power

[AC1-wlan-view]rrm-profile name default  // Turn off the RF channel and power auto tuning function

[AC1-wlan-rrm-prof-default]calibrate auto-channel-select disable  

[AC1-wlan-rrm-prof-default]calibrate auto-txpower-select disable

[AC1-wlan-view]ap-id 0  // To configure AP radio frequency 0 and 1 Channel and power

[AC1-wlan-ap-0]radio 0

[AC1-wlan-radio-0/0]channel 20mhz 6

[AC1-wlan-radio-0/0]eirp 127

[AC1-wlan-ap-0]radio 1

[AC1-wlan-radio-0/1]channel 20mhz 149

[AC1-wlan-radio-0/1]eirp 127

7. Verify configuration